SAW Touchscreen 5.4″-46″
Physical Parameters | |
Touchscreen Size Range | Available for 5.4” to 46” |
Technology | SAW (Surface Acoustic Wave) |
Touch Parameter | |
Input Methods | Finger, Gloved hand, Acoustic absorbed stylus |
Resolution | 4096×4096 |
Positional Accuracy | Standard deviation of error is not greater than 2.5mm and typically much less with calibration to display image |
Touch Response Time | ≤10.4ms |
Touch Activation Force (Typ.) | 50g (7000series), 80g (6000series) |
Electrical Parameter | |
Input Voltage | 12V DC |
Current | 95mA, typical, supply must be capable of sourcing 200mA minimum |
Power | Typical power consumption is 1140mW at 12V |
Noise Parameter | Total noise and ripple requirement must be less than 50mV (p-p) for frequencies above 1 MHz |
Interface | Combo USB & RS232 |
Baud Rate | For RS232 interface: 9600bps |
Environment Parameter | |
Temperature | Operating: 0℃ to 65℃ Storage: -20℃ to 85℃ |
Humidity (non-condensing) | Operating: 10% to 90% RH, 40℃ Storage: 10% to 90% RH, 40℃ |
MTBF | 300,000 hours demonstrated |
ESD | Per EN 61000-4-2: Contact discharge 4kV, Air discharge 8kV |
Agency Approvals | CE, FCC Class A, UL |
Warranty | 5 years |
Drawings and Spec Sheet?? | ||
Spec Sheet | Download | |
Dimensional Drawing | Download |
Write your message here and send it to us